Pipe End 1/8 to 2 - 3/16 to 2-1/2 Inch Tube Size - Chamfering Mill High Speed Steel ID 1996-

Part Number: 1996-

Pipe End 1/8 to 2", Tube End 3/16 to 2-1/2" Tube Size, Chamfering Mill High Speed Steel

Your Price: $204.40CAD

Availabilty In Stock

Pipe End 1/8 to 2, 3/16 to 2-1/2 Inch Tube Size, Chamfering Mill High Speed Steel ID 1996-

Select Size From Dropdown *

Add Name:

*Add new shipping info at checkout

Quantity

Pipe End 1/8 to 2", Tube End 3/16 to 2-1/2" Tube Size, Chamfering Mill High Speed Steel ID 1996

The Chatterless design of the Tube End Chamfering Mills provide a shearing action,

yielding a smooth machined surface with an angle of 30° on the inside and 45° on the outside diameters.

Other angles may be ordered as specials. This series of tools is offered in a range of sizes to accommodate

pipe and tubing from 3/16" to 2-1/2" outside diameters. All models are adjustable for different wall thicknesses.

The cutting teeth are developed as to preclude chatter and provide ample chip room for every operating condition.

Moderate speeds from 100 R.P.M. for 1" steel tubing to about 200 R.P.M. for 1/2-inch tubing are recommended.

It is advisable to start at a slower speed on any given material or size and increase until best results are obtained.

CDTooling.com