Gages: Block, Pin, Plug, Thread

Gage Blocks, Plug Gages, Pin Gages, Thread Gages

Precision Steel Gage Blocks and Micro Checking Set

$946.60CAD

Availability In Stock

Select Options

Precision Sine Plate and Bars 2-1/2 - 2-5/8 - 3 - 4 inch Wide - 3-3/4 and 6 Long ID 1614-

$559.53CAD

Availabilty: In Stock

Select Options

TCT-GO-NO-GO GO-G .130 + .0005/-.0000 / GO .125 + .0005/-.0000 SOLID CARBIDE SQUARE GAGE ID 2839

$401.45CAD

Available 5-10 days

Details

29 Degree Acme Thread Gage- ID: 14347-4901-0031

$40.03CAD

Availability In Stock

Select Options

WIRE MEASURING GAGE - Measures gauge numbers from 36 to 0 (.003-.3125)- ID: 14348-4901-0048

$68.88CAD

Availability In Stock

Select Options

Go/No Go Gauge 1155-00 Motor Tube Gage ID 15241-

$418.48CAD

Back Order

Select Options

10 Piece Setting Masters Gauge Measuring Tools Quick - easy and extremely accurate ID 16376-

$742.98CAD

Availability In Stock

Select Options

PRO-QUALITY 50 PC PIN GAGE SET WITH CERT(.011-.060 INCH)- ID: 20590-4101-0040

$209.99CAD

Availability In Stock

Select Options

50 PIECE (M0-) PIN GAGE SET (.011-.060 INCH) - NO CERT- ID: 20591-4101-0010

$114.95CAD

Availability In Stock

Select Options

0.20-1.28MM (- .005) 55 PIECE PIN GAGE SET- ID: 20592-4101-1010

$218.98CAD

Availability In Stock

Select Options

440 PC Precision Pin Gage Set (.061-.500 INCH) - M1 & M2 MINUS - ID: 20593-4101-0050

$695.50CAD

Availabilty In Stock

Select Options

.011-.060 INCH PIN GAGE HANDLE- ID: 20594-4102-0011

$79.93CAD

Availability In Stock

Select Options

1/32 - 1/2 Inch Pro-Series Aluminum Pin Gage Handle - ID: 20596-4102-0020

$73.11CAD

Availabilty In Stock

Select Options

.011-.060 INCH PIN GAGE HANDLE- ID: 20597-4102-0001

$39.90CAD

Availability In Stock

Select Options

.0110 - .250 Inch Size Pro-Series Black-Oxide Steel Pin Gage Set - PRO-QUALITY 240 PC- With Certs - ID: 20598-4101-0102

$857.38CAD

Availabilty In Stock

Select Options

36 PIECE RECTANGULAR STEEL GAGE BLOCK SET (GRADE 2)- ID: 20764-4101-0002

$1,139.95CAD

Availability In Stock

Select Options

BASE BLOCK (4 x 2.750 x 1/7 INCH) FOR RECTANGULAR GAGE BLOCK- ID: 20767-4101-0601

$579.28CAD

Availability In Stock

Select Options

87 PIECE METRIC RECTANGULAR GAGE BLOCK SET (JS GRADE 1)- ID: 20771-4101-1041

$1,725.60CAD

Availability In Stock

Select Options

1 2 3 4 5 6 7 ...60 Next Page

A Go-No gauge (or Go/no go) refers to an inspection tool used to check a workpiece against its allowed tolerances.
Its name derives from its use: the gauge has two tests; the check involves the workpiece having to pass one test (Go) and fail the other (No Go).
It is an integral part of the quality process that is used in the manufacturing industry to ensure interchangeability of parts between processes,
or even between different manufacturers.
A Go NoGo gauge is a measuring tool that does not return a size in the conventional sense, but instead returns a state.
The state is either acceptable (the part is within tolerance and may be used) or it is unacceptable (and must be rejected).
They are well suited for use in the production area of the factory as they require little skill or interpretation to use effectively
and have few, if any, moving parts to be damaged in the often hostile production environment.

These gauges are referred to as plug gauges; they are used in the manner of a plug.
They are generally assembled from standard parts where the gauge portion is interchangeable with other gauge pieces
(obtained from a set of pin type gauge blocks) and a body that uses the collet principle to hold the gauges firmly.
To use this style of gauge, one end is inserted into the part first and depending on the result of that test, the other end is tried.[1]

A set of pin from 1.550 - 6.725 mm
In the right hand image, the top gauge is a thread gauge that is screwed into the part to be tested,
the labeled GO end will enter into the part fully, the NOT GO end should not.
The lower image is a plain plug gauge used to check the size of a hole, the green end is the GO,
red is the NO GO. The tolerance of the part this gauge checks is 0.30mm where the lower size of the
hole is 12.60mm and the upper size is 12.90mm, every size outside this range is out of tolerance.
This may be initially expressed on the parts drawing in a number of styles, three possibilities may be:
12.75mm +/- 0.15mm
12.60mm +0.30 -0.00
12.90mm +0.00 -0.30

Gauge blocks (also known as gage blocks, Johansson gauges, slip gauges, or Jo blocks) are a system for producing precision lengths.
The individual gauge block is a metal or ceramic block that has been precision ground and lapped to a specific thickness.
An important feature of gauge blocks is that they can be joined together with very little dimensional uncertainty,
which means that several blocks can be stacked to create a desired length, for example, 7 mm + 10 mm = 17 mm.
The blocks are joined simply by rubbing them against each other, which causes them to cling together (see "wringing").
Consequently, a small number of gauge blocks can be used to create accurate lengths within a wide range.
By using 3 blocks from a set of 30 blocks, one may create any of the 1000 lengths from 3.000 to 3.999 mm in 0.001 mm steps
(or .3000 to .3999 inches in 0.0001 inch steps). Gauge blocks were invented in 1896 by Swedish machinist Carl Edvard Johansson.[1]
They are used as a reference for the calibration of measuring equipment used in machine shops, such as micrometers, sine bars, calipers,
and dial indicators (when used in an inspection role). Gauge blocks are the main means of length standardization used by industry.

CDTooling.com

Gages: Block, Pin, Plug, Thread

Products (Total Items: 1071)